電纜槽鋼模具，高速公路電纜槽模具，隧道電纜槽模具，地鐵電纜槽模具，雙槽三槽電纜槽模具，采用單槽、雙槽、多槽模式，滿足鋪設電纜的需求，對于電纜起到保護作用的一種預制塊，生產的電纜槽預制塊都是人工進行操作的，因為體積大，所以脫模比較費事。常規的雙槽電纜槽為720*475類型的，多槽的話以鋼模板制作為主，這種模具還有一保定平面設計培訓  防撞墻模具 防撞墻模具 防撞護欄模具 大棚遮陽網 遮陰網些其他的規格尺寸，對于這種模具我們比較常見的結構是雙槽的，也就是我們常說的高鐵電纜槽模具。我們經常使用這種模具的原因就是這種模具的功能是比較多的，既可以用來排水，也可以起到很好的保護電纜的作用。而且它可以使用abs型塑料進行制作，這種塑料的提取成本是比較低的，所以使用其生產出來的模具的價格也是比較便宜的。還有就是塑料材質的模具的加工技藝是比較的先進的，所以生產出來的模具的不但質量可以得到保證，而且生產出來的數量能夠很好的滿足客戶的需求
Cable channel steel mould, expressway cable channel mould, tunnel cable channel mould, subway cable channel mould, double channel and three channel cable channel mould, which adopts single channel, double channel and multi channel mode to meet the needs of laying cables. It is a kind of prefabricated block that plays a protective role for cables. The cable channel prefabricated blocks produced are operated manually because of their large volume, So demoulding is more troublesome. The conventional double slot cable tray is 720 * 475 type. If there are multiple slots, it is mainly made of steel formwork. This kind of mold has some other specifications and dimensions. For this kind of mold, our common structure is double slot, that is, the high-speed railway cable tray mold. The reason why we often use this kind of mold is that it has many functions. It can not only be used for drainage, but also play a good role in protecting cables. And it can be made of ABS plastic. The extraction cost of this kind of plastic is relatively low, so the price of the mold produced by it is also relatively cheap. In addition, the processing technology of plastic molds is relatively advanced, so the quality of the molds produced can be guaranteed, and the quantity produced can well meet the needs of customers